Home > Cannot Ping > As400 Ping Command

As400 Ping Command

Contents

Examine the following screenshot of the Option 12 from the CFGTCP command (the CHGTCPDMN command will also get you there): Notice the section near the bottom that reads "Domain name server:". If not, you will need to resolve the networking issues on that PC first. Load More View All Getting modules to adopt authorities from the main program Using the SPLF0200 format in QUSLSPL API Upgrade from V5R1 to V5R3 and license validation Is V5R3 needed Thanks. weblink

Any other uses are prohibited. Not all servers are set up to return replies to PING. If you reside outside of the United States, you consent to having your personal data transferred to and processed in the United States. On the iSeries, run the following, where 1.1.1.1 is the IP address: PING RMTSYS('1.1.1.1') If you cannot ping the IP address, there is a problem with the remote system.

As400 Ping Command

Then the above commands won't help you. PC instructions: Try flushing your DNS cache: CMD: IPCONFIG /FLUSHDNS Then try to ping the server again by name. By knowing the last good hop of the route and the hop that's failing you should be able to identify what segment of the network is failing. Please check with your network administrator to make sure your machine has TCP/IP capability. ∑If you do get a response from the AS/400 when the ping command is issued, then it

How many verifications were attempted? A number of connection messages will scroll down your screen, telling you whether the PC could reach each server. Every PC on the local > network can ping, including the router. For example: Domain name server: Internet address . . . . . . .   '1.1.1.1'                                  '1.1.1.2'

Ask Question Free Guide: Managing storage for virtual environments Complete a brief survey to get a complimentary 70-page whitepaper featuring the best methods and solutions for your virtual environment, as well Iseries Continuous Ping Note: Only one host name is required. With the Trace Route results either from PC or AS400… Take those results to your network admin. device is active and able to exchange TCP/IP traffic.

Please try again later. If an entry for your remote system already exists, make sure that the information is correct: If the host name is incorrect, edit it. So, instead of just "getting by", spend the time to get your DNS servers set up properly. Ubuntu ARM server AMI for Amazon EC2 offers fast access in the cloud Canonical’s Ubuntu ARM server AMI for Amazon EC2 provide open source shops with a fast ARM server for

Iseries Continuous Ping

Perhaps there's an issue with your network and you don't know what hop it's on. http://support.rjssoftware.com/content/cannot-access-remote-system-iseries-using-system-name Thanks. As400 Ping Command Imagine you have an application that processes credit cards or retrieves shipping information using a web service. Cwbping Take those results to your network admin.

The AS400 command is a little bit different that DOS. http://scriptkeeper.net/cannot-ping/cannot-ping-aol-com.html We'll send you an email containing your password. With the Trace Route results either from PC or AS400... After some debugging you find the Web Service (or email)call is erroring out.

If the issue still isn't resolved, bypass the DNS servers by setting up an entry for the remote system in Host Table Entries: Note: Even if you don't need this option By knowing the last good hop of the route and the hop that's failing you should be able to identify what segment of the network is failing. Privacy Improve This Answer Improve This Answer Processing your response...

Discuss This Question: 12  Replies There was an error processing your information. http://scriptkeeper.net/cannot-ping/cisco-switch-ping-command.html We'll let you know when a new response is added.

Work with TCP/IP host table entries. We'll let you know when a new response is added. This is where you will enter the IP addresses of the DNS server(s) that your organization uses.

limit.) Question: (Please be specific.) Tags: (Separate with commas.) What is a Tag?

So far, it looks perfectly normal. Privacy Load More Comments Forgot Password? If you receive a ďBad command or filenameĒ error message when typing the ping command, your machine may not have TCP/IP installed. Press Enter.

If you ping that server by it's IP address and even so you can't get any reply from it, the problem might be a firewall, router ACL, etc preventing it form Here's a list of CWBPING parameters you can use for OS/400 server verification, and the function each parameter performs. /all -- CWBPING attempts to verify all possible Client Access socket servers. This totally defeats the purpose of DNS servers in the first place (How Domain Names Work). http://scriptkeeper.net/cannot-ping/hp-ilo-ping.html On i only the Host table needs changing and one doesn't have to go through all configurations where IP adresses iso Host names are used. 6,585 pointsBadges: report carlosdl Feb 4,

To troubleshoot and verify whether your Client Access host servers are active, IBM provides the CWBPING utility with Client Access Express for Windows V5R1. (CWBPING is also available with earlier versions And, your IBM i will now work like it should and be able to communicate with the rest of the World Wide Web. The topmost listing is checked first. If set to *REMOTE it will use the DNS servers listed to try and resolve a host name first, then any local settings (ie, Host Table Entries).

It can also be the machine you're using to test this is not using the right DNS server... This is WRONG. Your network is 192.168.0.x Your VPN address is NOT 192.168.0.x so without the above route the 400 doesn't know where to send the data for a non 192.168.0.1 address __________________________________________________ Kirk E-Mail: Submit Your password has been sent to: -ADS BY GOOGLE Latest TechTarget resources Enterprise Linux Data Center SearchEnterpriseLinux SUSE Linux jumps on the open private cloud deployment train SUSE Linux